Colorado 2WD L4-2.8L VIN 8 (2004)
When AF is enabled and you recall a RDS station stored on preset, the radio determines if the station stored is of acceptable quality. If not, the radio
checks all available AF's for your station. If the radio fails to locate your program, AF SEARCH will be displayed as the radio scans across the band
looking for your program or an affiliated network. If the radio cannot find the original station or an acceptable alternate frequency NOT FOUND will
be displayed and the radio returns to the original frequency for the preset.
RDS Clock Time
Broadcasters can choose to send clock time information in the RDS data. This information can be used to update the clock time on the radio. RDS
clock time is broadcasted once a minute. To set the clock using RDS clock data perform the following:
-
Press and hold the HR and MIN buttons together for 2 or more seconds to update the time.
-
The display will show UPDATED after receiving the broadcasted time data.
-
If the broadcaster is not broadcasting the time data, the radio will display NO UPDATE and the time remains unchanged.
Radio Error Messages
The radio displays the following error messages:
CHECK CD: Displays when the player encounters a focus or tracking error.
CHK CDXX: Displays when the CD changer encounters a focus or tracking error, If equipped.
NO DISC: Displays when the radio expected a disc to be inserted.
NONE: Displays when the radio is unable to detect the vehicle speed data information via the class 2 serial data circuit.
XM Satellite Radio
XM is a national satellite radio service that offers up to 100 coast to coast channels including music, news, sports, talk and children's programming.
XM provides digital quality audio and text information, including song title and artist name. A service fee is required in order to receive the XM
service. For more information, contact XM at www.xmradio.com or call 1-800-852-9696.
Digital Radio Receiver
The radio controls communicate with the digital radio receiver via the class 2 communication circuit. The digital radio receiver sends low level audio
signals to the radio.
Viewing Messages
Press the TUNE/SELECT/RCL knob while in XM mode to view various pieces of information related to the current song or channel. By pressing
TUNE/SELECT/RCL knob, you may view four different categories of information: Artist Name/Feature, Song/Program Title, Channel Category, and
other Additional Information that may be broadcast on that channel. Additional Information messages may not always be available. Each of the four
information types may have multiple pages of text. To reach a category, press TUNE/SELECT/RCL knob consecutively until the desired type is
displayed. If there are multiple pages of text for the selected information type, the radio will automatically display all the pages for that type at a rate
of approximately one page every three seconds before timing out and returning to the default display. You may override this feature by pressing the
TUNE/SELECT/RCL knob to review all of the pages at your own pace.
Selecting a Program Type
