Colorado 2WD L4-2.8L VIN 8 (2004)
1. Position the carpet in the vehicle.
2. Install the lower body rear corner trim panels.
3. Install the body rear trim panel.
4. Install the lower center pillar trim panels, if equipped.
5. Install the rear door sill plates, if equipped.
6. Install the left hinge pillar trim panel.
7. Install the right hinge pillar trim panel.
8. Install the front door sill plates.
9. Install the lower center I/P trim.
10. Install the floor console, if equipped.
11. Install the jack and tool storage bracket.
12. Install the storage bins, if equipped.
13. Install the rear seats, if equipped.
14. Install the front seats.
