Colorado 2WD L4-2.8L VIN 8 (2004)
Clutch Switch: Adjustments
CLUTCH RELEASE SWITCH ADJUSTMENT
1. Rotate the clutch release switch (4) counterclockwise, allowing the retainer (5) to release.
2. Pull the clutch pedal to full stop.
3. While holding the clutch pedal at full stop, push the switch (4) inward fully until the switch body contacts the clutch pedal arm. At this point the
plunger in the switch (4) should be pushed in.
4. Rotate the switch (4) clockwise until a "click" is heard.
