Colorado 2WD L4-2.8L VIN 8 (2004)
1. Position the lower timing chain guide to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the lower timing chain guide bolts.
^
Tighten the lower timing chain guide bolts to 18 Nm (13 ft. lbs.).
3. Install the cylinder head access hole plug.
^
Tighten the cylinder head access hole plug to 5 Nm (44 inch lbs.).
4. Install the crankshaft sprocket to the crankshaft sprocket snout. Aligning the marked link on the timing chain with the timing mark on the
crankshaft sprocket.
5. Install the timing chain tensioner shoe.
