Colorado 2WD L4-2.8L VIN 8 (2004)
7. Disconnect the transmission vent hose retainer (6) from the range selector cable bracket.
8. Remove the bolts securing the transmission range selector cable bracket to the transmission.
9. Remove the transmission range selector cable bracket from the transmission.
Installation Procedure
1. Position the transmission range selector cable bracket to the transmission.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the transmission range selector cable bracket bolts.
^
Tighten the transmission range selector cable bracket bolts to 25 Nm (18 ft. lbs.).
