Colorado 2WD L4-2.8L VIN 8 (2004)
Shifter M/T: Service and Repair
1306
Shift Lever Assembly Replacement (1306)
Removal Procedure
1. Pull upward on the boot (1) in order to disengage the bezel retainers (2) from the console (3).
2. Remove the set screw (1) from the shift lever (2).
3. Remove the shift lever assembly from the control lever.
Installation Procedure
1. Install the shift lever assembly to the control lever, aligning the set screw threaded hole with the seat (3)
2. Apply threadlock GM P/N 12345493 (Canadian P/N 10953488) to the shift lever set screw threads.