Colorado 2WD L4-2.8L VIN 8 (2004)
2. Lift the wiper blade off the windshield and install the wiper arm (1) to the wiper arm pivot shaft (2).
3. Align the tip of the wiper blade with the round dot in the blackout area of the windshield.
4. For the passenger side blade (2), ensure the wiper blade tip is held in position to the alignment dot (1) on the windshield.
5. For the driver side blade (2), ensure the wiper blade tip is held in position to the alignment dot (1) on the windshield.
6. Holding the wiper blade to the windshield dot, install the wiper arm nut.
NOTE: Refer to Fastener Notice in Service Precautions.
7. Continue holding the wiper blade in position while tightening the nut.
Tighten
Tighten the wiper arm nut to 33-38 N.m (24-28 lb ft).