Colorado 2WD L5-3.5L VIN 6 (2005)
Front Bumper Cover / Fascia: Service and Repair
Fascia Replacement - Front Bumper (Canyon/Colorado)
Fascia Replacement - Front Bumper (Canyon/Colorado)
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the front bumper (1) assembly.
3. Remove the push-pins retaining the fascia (2) to the front bumper.
4. Pull the fascia straight forward to remove.
Installation Procedure
1. Install the fascia (2) to the front bumper.
2. Install the push-pins retaining the fascia to the front bumper.