Colorado 2WD L5-3.5L VIN 6 (2005)
Power Mirror Switch: Procedures
Mirror, Window, and Door Lock Switch Replacement
MIRROR, WINDOW, AND DOOR LOCK SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the 2 screws securing the switch plate assembly to the door trim panel.
2. Lift the front of the switch plate up to disengage clip.
3. Remove the switch plate out of the door trim panel opening.
4. Disconnect the electrical connectors (3, 4) from the switches (2, 5).
5. Remove the switch plate assembly (1) from the vehicle.
6. If replacing only the switches, remove the switches from the plate.
7. If replacing only the switch plate, retain the switches for transfer.
INSTALLATION PROCEDURE
