Colorado 2WD L5-3.5L VIN 6 (2005)
5. Position a piece of wood across the piston to be installed.
6. Applying equal pressure by hand while pushing down, install the piston in the bore.
7. Remove the piece of wood.
8. Using the J 8092 and the J 45863, install the piston dust seal in the brake caliper.
Notice: Refer to Fastener Notice in Service Precautions.
9. Install the bleeder valve in the brake caliper housing.
^
Tighten the bleeder valve to 19 Nm (14 ft. lbs.).
10. Install bleeder valve cap.
