Colorado 2WD L5-3.5L VIN 6 (2005)
Heater Hose: Service and Repair
Heater Hose - Outlet
HEATER HOSE REPLACEMENT - OUTLET
TOOLS REQUIRED
J 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Remove the transmission.
3. Remove the generator.
4. Using the J 38185 disconnect the outlet hose from the heater core outlet tube.
5. Remove the heater outlet hose from the heater core.
6. Position the outlet heater hose clamp (6) at the water pump using J 38185.
7. Remove the heater outlet hose (7) from the outlet hose fitting.
8. Remove the heater outlet hose.
INSTALLATION PROCEDURE
1. Install the outlet heater hose.
2. Install the heater outlet hose (7) to the outlet hose fitting.
3. Position the outlet heater hose clamp (6) at the outlet hose fitting using J 38185.
4. Install the heater outlet hose to the heater core.
5. Position the outlet heater hose clamp at the heater core using J 38185.
6. Install the transmission.
7. Install the generator.
8. Fill the cooling system. Refer to Draining and Filling Cooling System.
