Colorado 2WD L5-3.5L VIN 6 (2005)
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the crankshaft balancer washer and NEW bolt.
4.1.
Tighten the crankshaft balancer bolt to 150 Nm (111 ft. lbs.).
4.2.
Use the J 45059 to rotate the crankshaft balancer bolt an additional 180°.
5. Raise and support the vehicle.
6. Remove the EN 46547 (1) from the flywheel teeth.
7. Install the service slot plug.
8. Lower the vehicle.
9. Install the drive belt.
10. Install the cooling fan.
