chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 1422 > < SIR Disabling and Enabling Zones|Page 1420
Page 10
background image

4. Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.

IMPORTANT:  With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.

5. Remove the left door trim panel.

6. Remove the connector position assurance (CPA) (3) from the side impact sensor yellow 2-way connector (5) located near the middle of the door.
7. Disconnect the side impact sensor yellow 2-way connector (5) located near the middle of the door.

8. Remove the trim panel.
9. Remove the connector positive assurance (CPA) from the seat belt pretensioner - right connector.

10. Disconnect the seat belt pretensioner - right connector from the vehicle harness connector.
11. Remove the garnish molding.

SIR Disabling and Enabling Zones|Page 1422 > < SIR Disabling and Enabling Zones|Page 1420