chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 1425 > < SIR Disabling and Enabling Zones|Page 1423
Page 13
background image

6. Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.

IMPORTANT:  With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.

7. Remove the connector position assurance (CPA) (1) from the steering wheel module yellow 4-way connector (1) located left of the steering

column (2) above the left hinge pillar trim panel.

8. Disconnect the steering wheel module yellow 4-way connector (1) located left of the steering column (2) above the left hinge pillar trim panel.
9. Remove the left door trim panel.

10. Remove the connector position assurance (CPA) (3) from the side impact sensor yellow 2-way connector (5) located near the middle of the door.
11. Disconnect the side impact sensor yellow 2-way connector (5) located near the middle of the door.

SIR Disabling and Enabling Zones|Page 1425 > < SIR Disabling and Enabling Zones|Page 1423