Colorado 2WD L5-3.5L VIN 6 (2005)
2. Lightly lubricate the O-ring seal with clean engine oil.
3. Install the intake CMP sensor into the cylinder head.
4. Add sealer GM P/N 12346004 (Canadian P/N 10953480) to the CMP sensor bolt threads.
5. Install the intake CMP sensor bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the CMP sensor bolt to 10 N.m (89 lb in).
6. Connect the engine wiring harness electrical connector to the intake CMP sensor.
