Colorado 2WD L5-3.5L VIN 6 (2005)
Fuel Line Coupler: Service and Repair
Quick Connect Fitting(S) Service (Plastic Collar)
QUICK CONNECT FITTING(s) SERVICE (PLASTIC COLLAR)
REMOVAL PROCEDURE
1. Relieve the fuel system pressure before servicing any fuel system connection. Refer to the Fuel Pressure Relief Procedure.
CAUTION: Refer to Gasoline/Gasoline Vapors Caution in Service Precautions.
IMPORTANT: There are several types of Plastic Collar Fuel and Evaporative Emission Quick Connect Fittings used on this vehicle.
-
Bartholomew (1)
-
Q Release (2)
-
Squeeze to Release (3)
-
Sliding Retainer (4)
The following instructions apply to all of these types of Plastic Collar Quick Connect Fittings except where indicated.
2. Using compressed air, blow any dirt out of the quick-connect fitting.
CAUTION: Refer to Safety Glasses and Compressed Air Caution in Service Precautions.
NOTE: Refer to Fuel and Evaporative Emission (EVAP) Hose/Pipe Connection Cleaning Notice in Service Precautions.
