Colorado 2WD L5-3.5L VIN 6 (2005)
Throttle Body: Service and Repair
THROTTLE BODY ASSEMBLY REPLACEMENT
REMOVAL PROCEDURE
1. Remove the air cleaner resonator and outlet duct.
2. Disconnect the evaporative emission (EVAP) canister purge pipe (1) from the throttle control module (2).
3. Disconnect the throttle control module electrical connector (2).
4. Remove the throttle control module bolts (1).
5. Remove the throttle control module (2) and the seal from the intake manifold.
6. Clean the gasket surface.
INSTALLATION PROCEDURE
