chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Deployment Outside Vehicle - Steering Wheel Module, I/P Module, and Roof Rail Module|Page 7424 > < Deployment Outside Vehicle - Steering Wheel Module, I/P Module, and Roof Rail Module|Page 7422
Page 16
background image

4. Position the 4 alignment posts of the inflatable restraint module to the holes that are located on the steering wheel housing.
5. Push the inflatable restraint module into the steering wheel to engage and latch the leaf spring fasteners (1).
6. After installation, pull up on the sides of the inflatable restraint module to ensure the leaf spring fasteners are engaged.
7. Enable the inflatable restraint steering wheel module. Refer to SIR Disabling and Enabling Zone 3 .

Instrument Panel Module Replacement

INFLATABLE RESTRAINT INSTRUMENT PANEL MODULE REPLACEMENT

REMOVAL PROCEDURE

1. Disable the SIR System. Refer to SIR Disabling and Enabling Zone 5.

CAUTION:
-

Refer to SIR Caution in Service Precautions.

-

Refer to SIR Inflator Module Handling and Storage Caution in Service Precautions.

2. Remove the instrument panel (I/P) accessory trim panel.
3. Remove the radio.
4. Remove the right access cover from the I/P end cap.
5. Remove the right air outlet.
6. Remove the I/P compartment door.
7. Remove the digital radio receiver, if equipped.

8. Access the 2 fasteners located above the service holes (1) inside the I/P compartment door opening.

Deployment Outside Vehicle - Steering Wheel Module, I/P Module, and Roof Rail Module|Page 7424 > < Deployment Outside Vehicle - Steering Wheel Module, I/P Module, and Roof Rail Module|Page 7422