chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 7522 > < SIR Disabling and Enabling Zones|Page 7520
Page 2
background image

4. Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.

IMPORTANT:  With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.

5. Remove the connector position assurance (CPA) from both (2) front end sensor connectors.

IMPORTANT:  This vehicle is equipped with 2 inflatable restraint front end sensors. When performing this procedure be sure to include both
sensors.

6. Disconnect both sensor connectors.

ENABLING PROCEDURE

1. Remove the key from the ignition.

2. Connect the sensor connectors to both (2) front end sensors.
3. Install the CPAs to both sensor connectors.

SIR Disabling and Enabling Zones|Page 7522 > < SIR Disabling and Enabling Zones|Page 7520