Colorado 2WD L5-3.5L VIN 6 (2005)
Important: Do not damage any inner panels or reinforcements.
6. Locate and drill out all factory welds. Note the number and location of welds for installation of the battery tray.
7. Remove the damaged battery tray.
Installation Procedure
Important: If the location of the original plug weld holes can not be determined, or if structural weld-thru adhesive is present, space the
plug weld holes every 40 mm (11/2 in) apart.
1. Drill 8 mm (5/16 in) plug weld holes as necessary in locations noted from the original battery tray.
2. Prepare all mating surfaces as necessary.
3. Apply 3M(R) Weld-Thru coating P/N 05916 or equivalent to all mating surfaces
