Colorado 2WD L5-3.5L VIN 6 (2005)
Brake Switch - TCC: Service and Repair
Torque Converter Clutch/Cruise Control Release Switch Replacement
Removal Procedure
1. Disconnect the electrical connector from the torque converter clutch/cruise control release switch.
2. Complete the following in order to remove the torque converter clutch/cruise control release switch from the brake pedal bracket:
1
Rotate the switch counter clockwise.
2
Pull the switch from the retainer.
3
Push the locking tabs inward to release the retainer.
Installation Procedure
1. Slide only the torque converter clutch/cruise control release switch retainer into the brake pedal bracket, until the locking tabs are fully engaged.