Colorado 2WD L5-3.7L (2007)
Important
Use only a 1/8 in diameter by 5/8 in long pop rivet with a 1/8 in inside diameter by 3/8 in outside diameter back-up washer to install the
latch.
3. Install the revised latch using a 1/8 in diameter by 5/8 in long pop rivet (1).
Install the 1/8 in inside diameter by 3/8 in outside diameter back-up washer (1) when installing the rivet to ensure the rivet does not pull through.
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table
Disclaimer