Colorado 2WD L5-3.7L (2007)
Truck Bed: Service and Repair
Pickup Box Replacement
Pickup Box Replacement
Removal Procedure
1. Disconnect the tail/turn signal lamp wiring connectors at the rear of the vehicle.
2. Remove the tail lamp assembly.
3. Open the fuel filler door.
4. Remove the fuel filler neck.
5. Remove the endgate.
6. Remove the pickup box fasteners (1) from the frame rails.
7. With the an assistant remove the box from the vehicle.
Installation Procedure
1. Align the pickup box on the frame rails.
Notice: Refer to Fastener Notice.
2. Loosely install the pickup box fasteners (1) to the frame rails.
