Colorado 2WD L5-3.7L (2007)
Impact Sensor: Service and Repair
Inflatable Restraint Front End Sensor Replacement
Inflatable Restraint Front End Sensor Replacement
Removal Procedure
Caution: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is
securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR
system repairs.
Caution: Refer to SIR Caution.
1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the grille.
3. Loosen the fasteners (1) retaining the front discriminating sensors to the radiator support.
4. Remove the sensor assembly from the radiator support.