Colorado 2WD L5-3.7L (2007)
-
The valve body gasket is identified by a V.
Be sure to place the valve body gasket on the valve body side of the spacer plate.
5. Ensure that the solenoid screens (1, 2) are in place on the spacer plate.
6. Use a small amount of J 36850 in order to retain the checkball (3) on the spacer plate in the location shown.
7. Place the 3-4 accumulator spring (4) on the spacer plate.
8. Install the spacer plate and related components to the transmission.
9. Look through the hole in the spacer plate to ensure that the checkball has remained in the proper location (4WD only).
Notice: Refer to Fastener Notice.
10. Install the spacer plate support and the spacer plate support retaining bolts.
Tighten the spacer plate support retaining bolts to 11 N.m (97 lb in).
-
RWD (1)
-
4WD (2)
11. After installing the spacer plate support (2), look through the hole in the spacer plate to ensure that the checkball (1) has remained in the proper
location (RWD only).
