Colorado 2WD L5-3.7L (2007)
7. Position the coolant reservoir (3) off to the side.
8. Remove the washer hose from the washer pump.
9. Drain the washer solvent into a suitable container.
10. Remove the washer solvent container from the vehicle.
11. Remove the pump (2), grommet (3), cap, and lower container grommet.
12. Discard the washer solvent container (1).
INSTALLATION PROCEDURE
1. Install a new washer pump grommet into the container.
2. Install the old cap and lower container grommet.
3. Install the old pump into the new pump grommet.
4. Use clean washer solvent on the washer pump grommet to aid in the pump installation.
5. Secure the top of the pump to the container.
