chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Rear Door Opening Weatherstrip Replacement|Page 9953 > < Rear Door Opening Weatherstrip Replacement|Page 9951
Page 6
background image

1. Open the rear side access door.
2. Remove the wedge from the side access door by squeezing the retainer clip on the wedge and rotating the wedge downward.

Installation Procedure

1. Install the wedge to the side access door by inserting the tabs into the slots on the door and rotating the wedge up until the retaining clip is fully

seated.

2. Close the rear side access door.

Weatherstrip Replacement Rear Side Access Door

Weatherstrip Replacement Rear Side Access Door

Tools Required

J 38778  Door Trim Pad Clip Remover or Equivalent

Rear Door Opening Weatherstrip Replacement|Page 9953 > < Rear Door Opening Weatherstrip Replacement|Page 9951