Colorado 2WD V8-5.3L (2009)
5. Remove the console from the vehicle.
Installation Procedure
1. Position the console to the floor panel.
2. Ensure the retainers are indexed to the corresponding holes in the floor panel.
Important: Ensure the console bracket is positioned under the seat frame.
3. Push downward on the console to seat the retainers.
4. If the vehicle is equipped with a floor mounted shift lever, install the shift lever bezel and boot.
5. Install the console bolts and if necessary, install the front bucket seat. Refer to Front Seat Replacement - Bucket (See: Seats/Service and
Repair/Front Seat Replacement - Bucket).
Console Replacement (Small w/Manual Transmission)
Console Replacement (Small w/Manual Transmission)
Removal Procedure