Colorado 2WD V8-5.3L (2009)
4. Connect the master cylinder primary brake pipe fitting (1) and tighten to 17 Nm (13 lb ft).
5. Connect the master cylinder secondary brake pipe fitting (1) and tighten to 17 Nm (13 lb ft).
6. Connect the brake fluid level indicator switch electrical connector.
7. Fill the master cylinder reservoir with the recommended brake fluid. Refer to Master Cylinder Reservoir Filling (See: Procedures/Master
Cylinder Reservoir Filling).
8. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair).