Colorado 2WD V8-5.3L (2009)
Wheel Cylinder: Service and Repair
Wheel Cylinder Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
1. Remove the rear brake shoes. Refer to Brake Shoe Replacement (See: Drum Brake System/Brake Shoe/Service and Repair).
2. Disconnect the brake pipe fitting (1) from the wheel cylinder.
Cap the brake pipe fitting and plug the wheel cylinder inlet port to prevent brake fluid loss and contamination.
3. Remove the wheel cylinder bolts (1).
