chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Idler Pulley > < Engine Mount Replacement - Left|Page 1962
Page 5
background image

5. Install the air conditioning compressor bracket bolts (1).
6. Install the air conditioning compressor. Refer to Air Conditioning Compressor Replacement (LH8)   (See: Heating and Air

Conditioning/Compressor HVAC/Service and Repair)Air Conditioning Compressor Replacement (LLV, LLR)   (See: Heating and Air
Conditioning/Compressor HVAC/Service and Repair).

7. Install the engine mount to frame bolts (1) and tighten to 65 Nm (48 lb ft) starting with the middle bolt then either side bolt.
8. Install the right side exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (LH8)   (See: Exhaust System/Exhaust

Manifold/Service and Repair/Exhaust Manifold Replacement - Right Side).

9. Install the front tire and wheels. Refer to Tire and Wheel Removal and Installation   (See: Maintenance/Wheels and Tires/Service and Repair).

10. Lower the vehicle.

Idler Pulley > < Engine Mount Replacement - Left|Page 1962