Colorado 2WD V8-5.3L (2009)
10. Position the drain pan under the oil filter.
11. Remove the oil filter.
12. Ensure that the oil filter gasket is still on the old filter if not, remove the oil filter gasket from the oil pan.
Installation Procedure
1. Apply clean engine oil to the NEW oil filter seal.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the NEW oil filter.
Tighten the oil filter to 30 Nm (22 lb ft).
3. Tighten the oil pan drain plug.
