Colorado 2WD V8-5.3L (2009)
12. Install the starter. Refer to Starter Motor Replacement (LLV/LLR) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair
)Starter Motor Replacement (LH8) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair).
13. Install the inner axle shaft. Refer to Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (See: Transmission and
Drivetrain/Differential Assembly/Service and Repair/Removal and Replacement/Front Drive Axle/Front Drive Axle Inner Shaft and Inner Shaft
Housing Replacement).
14. Install the transmission oil cooler line retaining bracket (4) and bolt (3) and tighten to 9 Nm (80 lb in).
15. Install the transmission oil cooler lines (1) to the retainer (2).
16. Install the oil level indicator tube. Refer to Oil Level Indicator and Tube Replacement (See: Engine Oil Dip Stick - Dip Stick Tube/Service and
Repair).
17. Fill the engine with oil. Refer to Engine Oil and Oil Filter Replacement (See: Engine Oil/Service and Repair).
18. Install the front differential, if equipped. Refer to Differential Carrier Assembly Replacement (See: Transmission and Drivetrain/Differential
Assembly/Differential Carrier/Service and Repair).
19. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair).
