chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Exhaust System|Service and Repair|Page 2297 > < Exhaust Manifold Heat Shield Replacement - Right Side|Page 2293
Page 1
background image

Muffler: Service and Repair

Exhaust Muffler Replacement (LH8) (5.3L)

Removal Procedure
Warning:
  Refer to Exhaust Service Warning   (See: Service Precautions).

Warning:  Refer to Protective Goggles and Glove Warning   (See: Service Precautions/Technician Safety Information/Protective Goggles and Glove
Warning).

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle   (See: Maintenance/Vehicle Lifting/Service and Repair).

Note:  Use care not to over extend the rear brake hose.

2. Complete the following in order to gain clearance to remove the muffler:

1. Remove the lower shock absorber nuts (9) and bolts (8).
2. Remove the right rear leaf spring nut (2) and bolt (1).
3. Wedge a block of wood (5) between the frame (4) and the rear axle (6).

Exhaust System|Service and Repair|Page 2297 > < Exhaust Manifold Heat Shield Replacement - Right Side|Page 2293