Colorado 2WD V8-5.3L (2009)
1. Apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent to the heater outlet hose fitting threads.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the heater outlet hose fitting. Tighten the heater outlet hose fitting to 45 Nm (33 lb ft).
3. Install the heater hose inlet to the heater pipe outlet.
4. Using the J 38185 , reposition the heater hose inlet clamp to the heater pipe outlet.
5. Fill the engine cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair)Cooling System Draining and Filling (Vac N Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair).
