Colorado 2WD V8-5.3L (2009)
Fuel Rail: Service and Repair
Fuel Injection Fuel Rail Crossover Tube Replacement
Fuel Injection Fuel Rail Crossover Tube Replacement
Removal Procedure
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH-48027) (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel
Pressure Relief (With CH 48027))Fuel Pressure Relief (Without CH-48027) (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel
Pressure Relief (Without CH-48027)).
2. Remove the fuel rail crossover pipe retaining clip screws (1) and retainer clips (3).
3. Remove the crossover pipe (2) from the left and right hand fuel rails.
4. Remove and discard the crossover fuel pipe O-ring seals (4).
Installation Procedure
