Colorado 2WD V8-5.3L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the nuts securing the rollover sensor to the floor panel.
Tighten the screws to 10 Nm (88 lb in).
2. Connect the electrical connectors.
3. Install the carpet. Refer to Floor Panel Carpet Replacement (See: Body and Frame/Interior Moulding / Trim/Carpet/Service and Repair).
4. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Air Bag Systems/Air Bag(s) Arming and Disarming/Service and Repair).