Colorado 2WD V8-5.3L (2009)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement
Removal Procedure
1. Remove the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Pump/Service and Repair).
2. Disconnect the fuel level sensor electrical connector (1) from the module cover.
3. Complete the following in order to remove the fuel level sensor (1) from the module bucket:
1. Disengage the locking tabs on the sensor.
2. Slide the sensor upward from the bucket.
Installation Procedure
