Colorado 2WD V8-5.3L (2009)
4. Install the outer tie rod to the steering knuckle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the NEW outer tie rod retaining nut.
*
Tighten the outer tie rod retaining nut to 45 Nm (33 lb ft) plus 95 degrees.
*
Tighten the outer tie rod end jam nut to 70 Nm (52 lb ft).
6. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
7. Lower the vehicle.
8. Adjust the front toe. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment (See: Alignment/Service and Repair/Wheel
Alignment - Steering Wheel Angle and/or Front Toe Adjustment).