Colorado 2WD V8-5.3L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Using the proper size wrench to hold the link ball joint, tighten the link nut to 44 Nm (32 lb ft).
4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair)
5. Remove the support and lower the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
Stabilizer Shaft Link Replacement (Z71)
Stabilizer Shaft Link Replacement (Z71)
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
3. Remove the link nut (1) at the lower control arm.
4. Using the proper size wrench to hold the link ball stud, remove the link nut (2) at the stabilizer shaft.
