Colorado 2WD V8-5.3L (2009)
2. Hand tighten the lower link nut (1) at the lower control arm.
3. Hand tighten the link nut at the stabilizer shaft (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Using the proper size wrench to hold the link ball stud, tighten the link nut to 44 Nm (32 lb ft).
5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair)
6. Remove the support and lower the vehicle.