Colorado 2WD V8-5.3L (2009)
Clutch Release Bearing: Service and Repair
Clutch Release Bearing Replacement
Removal Procedure
1. Remove the transmission. Refer to Transmission Replacement (4WD) (See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Transmission Replacement)Transmission Replacement (RWD) (See: Manual Transmission/Transaxle/Service and Repair/Removal
and Replacement/Transmission Replacement).
2. Pull the clutch actuator cylinder release bearing (2) from the clutch actuator cylinder dust cover (1).
Installation Procedure
Important: Do not allow the release bearing to become damaged, replace if dropped or damaged.