Colorado 2WD V8-5.3L (2009)
6. Route and engage the coolant recovery hose clips to the fender flange.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
7. Install the washer container to fender flange fasteners (1,2).
9 Nm (80 lb in)
8. Install the coolant recovery reservoir to wheelhouse fastener (3).
9 Nm (80 lb in)
9. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Service and Repair) for the 2.8L (LK5) engine or Air Cleaner Assembly Replacement (See: Engine,
Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair) for the 3.5L (L52) engine.
10. Fill the washer solvent container with clean washer solvent.
11. Fill the coolant recovery reservoir with new engine coolant per manufacturer's specification.
12. Test the washer system and inspect for leaks.
13. Close the hood.
