Colorado 4WD L4-2.9L (2008)
Power Seat Switch: Service and Repair
Lumbar Switch Replacement
Lumbar Switch Replacement
Removal Procedure
1. Remove the seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement (See: Seats/Seat Cushion/Service and
Repair/Seat Cushion Outer Trim Panel Replacement) .
2. Remove the switch bezel from the seat assembly. Refer to Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement (See: Seats/Service
and Repair/Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement) .
3. Remove the buttons from the switch (3).
4. Release the tabs (4) that retain the seat switch (3) to the seat bezel.
5. Disconnect the lumbar switch harness (1) from the seat harness.
6. Remove the lumbar switch from the seat bezel.
Installation Procedure