Colorado 4WD L4-2.9L (2008)
4. Install the generator bolts.
Tighten the generator bolts in sequence to 50 N.m (37 lb ft).
5. Engage the engine wiring harness conduit (4) to the engine lift bracket (1).
6. Install the bolt (3) securing the A/C compressor hose/pipe bracket (2) to the engine lift bracket (1).
Tighten the bolt to 9 N.m (80 lb in).
7. Install the drive belt. Refer to Drive Belt Replacement (See: Drive Belt/Service and Repair).