Colorado 4WD L4-2.9L (2008)
7. Install the engine wiring harness bracket bolts.
Tighten the bolts to 10 N.m (89 lb in).
8. Secure the following engine wiring harness retainers to the bracket:
*
The battery cable
*
The engine (4, 6)
*
The MAP sensor (5)
9. Install the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair).
10. Install the left front wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
11. Lower the vehicle.
12. Connect the engine wiring harness retainer (1) to the intake manifold (2).
13. Install the generator. Refer to Generator Replacement (See: Starting and Charging/Charging System/Alternator/Service and Repair).
