Colorado 4WD L4-2.9L (2008)
8. Install the exhaust camshaft actuator into the timing chain.
Aligning the dark link (1) of the timing chain with the timing mark (1) on the exhaust camshaft position actuator sprocket.
Important:
*
To aid in aligning the actuator to the camshaft, use a 25 mm (1 in) wrench on the hex of the camshaft to rotate.
*
Ensure the alignment pin is properly engaged with the camshaft.
9. Install the exhaust camshaft actuator onto the exhaust camshaft.
10. Install the new exhaust camshaft actuator bolt.
Tighten the intake camshaft sprocket bolt to 25 N.m (18 lb ft) plus an additional 135 degrees using the J 45059 .
