chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Exhaust Manifold Heat Shield Replacement|Page 5486 > < Exhaust Manifold Heat Shield Replacement|Page 5484

Colorado 4WD L4-2.9L (2008)

Page 2
background image

1. Position the exhaust muffler heat shield to the floor panel studs.

Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .

2. Install the 3 nuts securing the heat shield to the floor panel.

Tighten the heat shield nuts to 9 N.m (80 lb in).

3. Lower the vehicle.

Exhaust Manifold Heat Shield Replacement|Page 5486 > < Exhaust Manifold Heat Shield Replacement|Page 5484