Colorado 4WD L4-2.9L (2008)
following steps.
12. Disconnect the CH-48027-2 (2) from the CH-48027-3 (4).
13. Disconnect the CH-48027-3 (4) from the J 42242.
14. Disconnect the J 42242 from the fuel rail service port.
15. Remove the shop towel from around the fuel rail service port, and place in an approved gasoline container.
16. Install the fuel rail service port cap.
17. Install the engine cover, if required.
18. Tighten the fuel fill cap.
