Colorado 4WD L4-2.9L (2008)
4. If equipped with an automatic transmission perform the following steps, disengage the EVAP/fuel pipe clips (1) from the oil indicator tube bracket
and the engine wiring harness bracket.
5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
6. Disengage the EVAP/fuel pipe clip (2) from the fuel pipe bracket.
7. Disengage the EVAP/fuel pipe clip (3) from the transmission range selector lever bracket.
8. If equipped with a manual transmission perform the following steps, disengage the EVAP/fuel pipe clips (1) from the oil indicator tube bracket
and the engine wiring harness bracket.
9. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
10. Disengage the EVAP/fuel pipe clips (1 and 2) from the fuel pipe brackets.